Home Renovation Electrician in Perth: Prices and Quotes

Electrical work should be planned before renovation walls and ceilings are closed. In Western Australia, a licensed electrician must carry out renovation wiring, and the work should be tested and certified before handover. A home renovation electrician in Perth can assess the switchboard, planned power points and lighting circuits during the design stage.

It’s easy to focus on finishes, but early electrical decisions can help you avoid cutting into completed walls later. This guide covers renovation electrical work, planning lighting and power points, applicable safety requirements and the details that shape a quote. You’ll also learn how to coordinate repairs and upgrades with the wider renovation, so you can make informed decisions before work begins.

Key Takeaways

  • Plan power points, lighting and appliance locations before wall linings and ceiling work are complete.
  • For a renovation, plan wiring early and arrange for the electrical work to be checked before handover.
  • A quote depends on the scope of work, existing electrical infrastructure and the changes required; clarify what tasks it covers.
  • Identify repairs and wiring needs early, as rough-in work happens before wall and ceiling linings are installed.

Power points and lighting

Plan power points, lighting circuits and appliance locations during the design stage. In a Perth renovation, decide how you’ll use each room before plastering, tiling or ceiling work is complete.

Start with a room-by-room plan. Mark where furniture, benches and appliances will go, then position outlets for practical use. For example, a kitchen plan should account for benchtop appliances and the intended oven and cooktop locations. Have the existing switchboard assessed against the planned circuits and electrical loads.

Plan lighting just as early. Note where general and task lighting and switches should go, such as over a kitchen bench, beside a hallway entrance or near a bathroom mirror. Confirm ceiling access and fitting positions before the ceiling is finished. Moving a light point later can mean reopening completed surfaces.

Include LED fittings and controls in the renovation plan. Check that the proposed fittings suit their intended locations and that existing dimmers or other controls are compatible. A lighting schedule listing each room, fitting position and control point gives the renovation team a clear reference before installation.

Before work starts, review these details alongside the renovation plan:

  • Power point locations for furniture, benches and appliances.
  • Lighting positions, switching and any dimming requirements.
  • Planned appliance locations and related circuit needs.
  • Existing switchboard capacity against the proposed work.

Update the plan if cabinetry, room layouts or appliances change. Moving a kitchen island, for instance, can affect where outlets and task lighting are most useful. Finalising these decisions before wall and ceiling finishes helps coordinate wiring with other renovation work and reduces the need to cut into completed surfaces.

Electrical safety and Australian standards

A licensed electrician must carry out electrical renovation work in Western Australia. The completed work should also be tested and certified before handover.

Whether renovation work needs a separate permit or approval depends on its scope and the project’s approval pathway. Treat this separately from electrical testing and certification, which should be completed before handover.

In WA, a licensed electrician must handle renovation wiring, including new circuits and changes to existing wiring. Don’t attempt electrical work yourself. A licensed electrician should also assess sparking outlets or flickering lights, rather than leaving them to a DIY repair.

To check an electrician’s licence in Western Australia, ask for their licence details and verify them with the relevant WA electrical licensing authority before work begins. Match the details to the person carrying out the electrical work, not just the business name or quote.

Plan for safety from rough-in through to handover. Before walls are closed, discuss cable routes, new circuits and any switchboard changes. For example, include a new kitchen circuit in the electrical plan rather than leaving it until the cabinetry is installed.

Before accepting the finished work, make sure testing and certification are included in the handover. Keep the records with your renovation documents, alongside plans showing new power points, lighting and circuit changes. These details help identify what was altered if future repairs or upgrades are needed.

  • Use a licensed electrician for renovation wiring.
  • Arrange testing and certification before handover.
  • Have sparking or flickering electrical fittings assessed professionally.
  • Keep electrical records and updated renovation plans together.

A separate permit or approval may be needed, depending on the renovation’s scope and the project’s approval pathway. This is distinct from the testing and certification required before handover.

Electrician pricing and quotes

Compare quotes for the same renovation scope, not just the total. A home renovation electrician in Perth should outline the proposed tasks, materials and handover requirements. For example, replacing existing light fittings is not directly comparable to a quote that also covers new circuits and switchboard alterations.

The price depends on the project and is provided after a quote request. Key cost factors include the number of electrical changes, wiring access, existing infrastructure, materials and coordination with other trades.

Prepare a clear scope before requesting a quote. Include a marked-up floor plan, appliance locations, lighting changes and known electrical issues. Note whether walls will be open during the work. Cable installation can involve different tasks before and after wall linings are fitted, so the renovation stage affects the work required.

Review each quote to understand the proposed work. Look for separate descriptions of tasks such as relocating outlets, installing lighting, adding circuits or altering existing wiring. Note assumptions about access, finishes or work by other trades. Clear descriptions make differences between quotes easier to identify.

When comparing a home renovation electrician in Perth, consider the scope, technical detail and how clearly the quote explains the work and handover. Check that the proposed tasks reflect your plans, including changes to appliances or room layouts.

  • Match each quote to the same floor plan and task list.
  • Compare described work and materials, not just the total.
  • Check how testing and handover are addressed.
  • Note assumptions about access, wall linings and trade coordination.

Before accepting a quote, compare it with the latest renovation drawings. If the kitchen layout changes or lighting positions move, update the scope to match the current plan. Keep the quote with your drawings and renovation records. These documents help coordinate electrical work with cabinetry, plastering and other scheduled tasks.

Home Renovation Electrician in Perth: Prices and Quotes

Residential electrical repairs and renovations

Electrical work needs to fit the renovation sequence, from investigating existing faults to installing new wiring. Plan each stage around when walls and ceilings are open.

Electrical work timelines

There isn’t one standard duration for renovation electrical work. The schedule follows the scope, the number of electricians, access to wiring and the sequence of other trades. New-home electrical installation can take up to 10 days, depending on job size and electrician numbers, but that figure isn’t a renovation timetable. Ask for the work stages and dependencies to be shown against the renovation schedule.

When to hire an electrician

Bring an electrician into the planning stage, before plasterboard or other wall linings go on. This allows cable routes, circuit changes and appliance locations to be coordinated before finished surfaces restrict access. During rough-in, cables are run through walls and ceilings before linings are installed. In a kitchen, plan oven and cooktop connections alongside cabinetry and appliance positions.

Include repairs in the renovation plan. List existing faults, affected rooms and proposed changes before work starts. For example, if a room’s wiring needs attention while its walls are open, schedule the work before relining. This gives electrical work a defined place alongside plastering, tiling and cabinetry, rather than leaving access until the finishes are complete.

Use a simple sequence to keep decisions and site work aligned:

  • Record electrical faults and renovation changes in one scope.
  • Coordinate cable routes and rough-in with open-wall work.
  • Complete wiring changes before plasterboard or wall linings go on.
  • Schedule final testing and certification before handover.

Share the renovation schedule and room plans when arranging residential electrical work. Discuss electrical work for your renovation as you prepare the project scope.

Banner Power provides Residential Electrical Services for Perth homeowners planning renovation work. This is a practical option when your project includes repairs, wiring changes or lighting upgrades that need coordinating with other renovation stages. For business premises, Banner Power also provides Commercial Electrical Services.

Prepare a clear scope before getting in touch. Include the rooms affected, planned changes and renovation schedule. This context helps define the electrical work around your project’s requirements.

Contact Banner Power to discuss electrical services for your renovation.

Set your renovation up for a confident start

Turn your renovation plans into a clear electrical scope as your next step. Note the rooms affected, the changes you’re considering and where the work fits in the build schedule. This gives a home renovation electrician in Perth a practical starting point for discussing your project.

Banner Power provides Residential Electrical Services for home projects, as well as Commercial Electrical Services and Industrial Electrical Solutions. Its electrical work also serves mining operations. This breadth makes Banner Power relevant to residential renovations and electrical requirements across other sectors.

Before getting in touch, gather your current plans and a short list of priorities. You don’t need every detail finalised; identifying the intended changes helps start a focused discussion about the work ahead.

Contact Banner Power to discuss your project and take the next step towards a well-planned renovation.

Frequently Asked Questions

NEED AN ELECTRICIAN?

If your Perth renovation involves wiring changes, new circuits or electrical faults, engage a licensed electrician. Renovation wiring in Western Australia must be completed by a licensed electrician, and sparking or flickering lights shouldn’t be handled as DIY repairs. Banner Power provides Residential Electrical Services for homeowners planning renovation work or addressing faults during a project.

How much does a renovation electrician cost in Perth, WA?

The price depends on the project and is provided after a quote request. Factors include the number and type of tasks, access to existing wiring, materials, switchboard changes and how the work fits the renovation schedule. For a useful estimate, provide current plans and describe each room’s proposed electrical changes, including repairs or new appliance connections.

What is the hourly rate for an electrician in Perth?

There isn’t a single hourly rate for every renovation job. The price depends on the project and is provided after a quote request. Factors include the work involved, site access, materials and whether wiring or circuits need alteration. Ask for the proposed tasks and pricing basis in writing so you can understand what the quote covers.

What are the risks of DIY electrical work during a renovation in WA?

DIY renovation wiring isn’t permitted in Western Australia, where a licensed electrician must carry out wiring work. Attempting it can leave the installation unsafe and cause problems during testing and handover. Don’t investigate sparking outlets or flickering lights yourself. Note the affected fitting or room and arrange professional attention.

What electrical safety standards and smoke alarm rules apply to renovated homes in Western Australia?

In WA, a licensed electrician must carry out renovation electrical work, which should then be tested and certified before handover. Include smoke alarms in your renovation planning, noting their locations and any planned changes. Keep records of completed electrical work with your renovation documents for a clear record of the installation and handover.

What questions should I ask a Perth electrician before getting a renovation quote?

Ask which tasks the quote covers, what materials are included and how the work fits the renovation schedule. Give the electrician your latest plans, then clarify how appliance changes or altered room layouts affect the scope. Ask what records you’ll receive at handover, including testing and certification documents. These details help you compare quotes against your project’s actual needs.